Our doors/doorframes can be polished, painted like normal wood therefore in event of a scratch it can be repolished / repained / repaired. However in case of transfer coated doors we will get it repaired by a handheld transfer coating machine from our trained technicians at the site.
Although normal fevicol used for wood can be used however Fevicol SR adhesive is better.
No the paint is not included in the warranty like in case of any other product for e.g. car, furniture etc.
The width of the door is fixed however the length can be altered however a closing strip of the same material has to be used to close the open cavity after cutting.
Although these doors can be nailed however screwing is recommended as in case of wood and the screws do not become loose over time.
The weight of the door is similar to the weight of a wooden flush door.
The paint / polish can be changed as and when required by regular painters who work on wood.
The door frames are fixed using a fastener and screw. The fastener goes inside the wall and the screw holds the frame in place. It's a very strong and stable approach which is even followed nowadays for fixing wood door frames.
Since our doors come with matching door frames whatever slight difference is there in sizes in width and length can be accommodated in-between the doorframe and the wall by inserting wooden plank or ply board to fill the gap.
Yes, prices depend on design, finish, any other design work like glass fixing, grooving , fixing steel strips, sun mica etc.
Our products are fire retardant not fire proof. They are self distinguishing.
Yes, it is very easy to finish just like normal wood.
Yes, it can be painted as well as polished.
Its scratch resistant not scratchproof like any other polish.
Normal fasteners which are available at hardware shops.
Yes, any size is possible.
"Delivery time will depend on size, design and finish it can range from 15 days -1 month.
The fasteners are as good as whole pass and cannot be broken..
Warranty Would be 20 Years against defects due to Termite, water or weather, for interior.
Adowoods has lower density than water. it means less than .91 gm cubic feet, comparatively other WPCs product available in the market having higher density.
Ado Woods Density has set in such a way that screw holding is better than other WPCs.
We use natural fibres for e.g. - rice husk, Peanut hulls, instead of calcium as a filler.
Expansion and contraction due to heat and cold is lesser than other available WPCs in the market.
One advantage of using natural fibres are the polish on Adowoods will be easier and reflecting if any body wants.
AdoWoods is not easily breakable product due to its light weight rather than WPCs product available in the market .
For more research and test result you can get the data about Ado Woods in the National Test House.
Last but not the least the only major draw back if you see in Ado woods is lack of awareness in people and the people don't know the method of using it or how to install.
